Modeling Maize Production under Different Management Scenarios in Kerman Province

Document Type : Research Article

Authors

• N Zakeri ¹
• H Farahbakhsh ²
• M Madadizadeh ³

¹ Former MSc Student of Agronomy, Faculty of Agriculture, Shahid Bahonar University, Kerman, Iran

² Genetic and Plant Production Department, Faculty of Agriculture, Shahid Bahonar University, Kerman, Iran

³ Department of Agroecology, Environmental Science Research Institute, University of Shahid Beheshti, Tehran, Iran

10.22067/jcesc.2023.82507.1248

Abstract

Introduction
Agriculture is a cornerstone of many developing economies, providing food, income, and employment for millions of people. It is also projected to play a vital role in feeding a global population of 9.1 billion people by 2050. However, there are growing concerns about the environmental impact of agriculture, particularly in arid and semi-arid regions like Iran. Managing water and fertilizer usage in agriculture is crucial to ensuring food security and sustainability. However, conducting field experiments to assess the interaction of all factors involved is expensive and time-consuming. This research focuses on optimizing maize production in Kerman province, a region where maize is a major crop. The research is motivated by the need to improve resource management in Iran, where water and fertilizer resources are limited. The APSIM model is used to determine the best management scenario for maize production in Kerman province. APSIM is a crop growth simulation model that can be used to predict the impact of different management practices on crop yield, water use efficiency, and nutrient use efficiency. The use of APSIM in this research provides a cost-effective and time-efficient alternative to conducting extensive field experiments. The results of this research will contribute to the development of sustainable and efficient agricultural practices in Kerman province and similar regions. These regions are characterized by resource constraints, such as limited water and fertilizer availability. The research aimed to simulate the effect of management parameters (planting date and irrigation) on Crop yield and subsequently achieve the optimal management scenario.
Materials and Methods
The APSIM model was used for simulation in three regions of Bardsir (temperate to cold climate), Jiroft (hot and humid climate), and Orzuye (hot and dry climate). The model requires four series of data: climate, soil, management, and crop data. The required climate data (from 1998 to 2018) including daily maximum and minimum temperatures, length of sunny hours, and daily precipitation were collected and prepared from the synoptic weather stations of the three mentioned regions.
The management data set for each of the study regions was prepared in the form of questionnaires and field research from experts of the Agricultural Jihad Organization, the Agricultural Research Center Organization, and prominent farmers in those regions. The crop data includes the plant genetic coefficients of the maize single cross hybrid 704, which were obtained from the calibration of the APSIM model. To optimize planting date and irrigation management in the studied areas, different planting and irrigation date treatments were investigated. In this research, planting date treatments included the conventional planting date of the region, 20 days before the conventional planting date (as early planting date), and 20 days after the conventional planting date (as late planting date). Irrigation treatments included the usual number of irrigations in the region (13 irrigations), less irrigation (11 irrigations), and more irrigation (15 irrigations).
Results and Discussion
Our results showed that the model successfully simulated maize phenology, especially maturity date, with high accuracy for all fertilizer amounts tested. The model performance in predicting biomass under different nitrogen treatments was also satisfactory, with a minimal difference between observed data and model results. The nRMSE of grain yield in the calibration stage was 11.2% and in the validation stage was 9%. The nRMSE for calibration of the biological yield of SC 704 was 14.8% and for validation was 13.9%. Also, the model was able to simulate phenology with very high accuracy (especially the days to maturity). Overall, the nRMSE of days to flowering was less than 10% and for the days to maturity was less than 5%. Late planting dates consistently showed better performance across regions and irrigation treatments, resulting in significantly increased grain yield compared to conventional and early planting dates. The highest seed yield was obtained with 15 times of irrigation, among the various irrigation treatments. Late planting combined with 15 times of irrigation yielded the best results in Kerman province, particularly in Bardsir, with a yield of 9300 kg ha^-1. Optimal moisture and air conditions, along with the cultivation of a late-maturing variety, contributed to the higher seed yield. These findings are consistent with previous research that has confirmed the positive impact of late planting and extended ripening periods on maize yield.
Conclusion
Our results showed that the model simulates the growth and yield of single cross 704 corn in Kerman province well, even after 20 days of late planting. Long-term simulation experiments showed that maize grain yield varied depending on the region, with the highest yield in Bardsir (8317 kg ha^-1) and the lowest yield in Jiroft (4735 kg ha^-1). The optimum maize grain yield (8872.8 kg ha^-1) was obtained by the interaction effect of late planting date and 15 times of irrigation.

Keywords

• APSIM model
• Grain yield
• Irrigation
• Simulation
• Sowing date

Main Subjects

• Plant modeling

---

©2024 The author(s). This is an open access article distributed under Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source.

References

1. Amjed, A., Sanjani, S., Hoogenboom, G., Ahmad, A., Khaliq, T., Wajid, S. A., Noorka, I. R., & Ahmad, S. (2012). Application of crop growth models in agriculture of developing countries: a review. Horticultural Science and Technology, 1(4), 95-99. https://doi.org/10.1016/S1125-0301(02)00100-5
2. Anonymous, (2022). Agricultural Statistics. Iranian Ministry of Agricultural Jihad. Department of Planning and Economic Affairs. Center of Statistics and Information Technology. Iran. p. 95. (in Persian).
3. Boote, K . (2011). Crop adaptation to climate change. Improving soybean cultivars for adaptation to climate change and climate variability. S.S. Yadav, R.J. Redden, J.L. Hatfield, H. Lotze-Campen, and A.E. Hall international editions. Wiley-Blackwell pp, 370-395. https://doi.org/10.1002/9780470960929.ch26
4. Choukan, R. (2013). Final Report of Yield Trial and Adaptability of Late and Medium Maturing promising Hybrids of Maize (Final Stage). In: Seed and Plant Improvement Institute (Ed.), Agricultural Research, Education and Extension Organization, Iran, pp. 50. (in Persian with English abstract).
5. Delve, R. J., Probert, M. E., Cobo, J., Ricaurte, J., Rivera, M., Barrios, E., & Rao, I. M. (2009). Simulating phosphorus responses in annual crops using APSIM: model evaluation on contrasting soil types. Nutrient Cycling in Agroecosystems, 84, 293-306. https://hdl.handle.net/10568/17023
6. Dupuis, I., & Dumas, C. (1990). Influence of temperature stress on in vitro fertilization and heat shock protein synthesis in maize (Zea mays) reproductive tissues. Plant Physiology, 94, 665-670. https://doi.org/10.1016/S1125-0301(02)00100-5
7. FAO. (2017). Agricultural production statistics. Available: http://faostat.fao.org
8. Fosu-Mensah, B. Y., MacCarthy, D. S., Vlek, P. L. G., & Safo, E. Y. (2012). Simulating impact of seasonal climatic variation on the response of maize (Zea mays) to inorganic fertilizer in sub-humid Ghana. Nutrient Cycling in Agroecosystems, 94, 255-271. https://doi.org/1010.07/s10705-012-9539-4.2134
9. Gungula, D., Kling, J., & Togun, A. (2003). CERES-Maize predictions of maize phenology under nitrogen-stressed conditions in Nigeria. Agronomy Journal, 95, 892-899. https://doi.org/10.2134/agronj2003.8920
10. Hatfield, J. L., & Prueger, J. H. (2015). Temperature extremes: effect on plant growth and development. Weather and Climate Extremes, 10, 4-10. https://doi.org/10.1016/j.wace.2015.08.001
11. Izadi-Darbandi, E. (2012). Evolution of drought stress and nitrogen rate on redroot pigweed (Amaranthus retroflexus) and corn (Zea mays) competition. Pajouhesh & Sazandegi. 94, 68-74. (in Persian).
12. Keating, B. A., Carberry, P. S., Hammer, G. L., Probert, M. E., Robertson, M. J., Holzworth, D., & McLean, G. (2003). An overview of APSIM, a model designed for farming systems simulation. European Journal of Agronomy, 18(3-4), 267-288.‏ https://doi.org/10.1016/S1161-0301(02)00108-9
13. Kpongor, D. S. (2007). Spatially explicit modeling of sorghum (Sorghum bicolor (L.) Moench) production on complex terrain of a semi-arid region in Ghana using APSIM. Universitäts-und Landesbibliothek, Bonn, Germany, pp, 144. https://hdl.handle.net/10568/17027
14. MacCarthy, D. S., Sommer, R., Vlek, P. L. (2009). Modeling the impacts of contrasting nutrient and residue management practices on grain yield of sorghum (Sorghum bicolor (L.) Moench) in a semi-arid region of Ghana using APSIM. Field Crops Research, 113, 105-115. https://hdl.handle.net/10568/17023
15. Madadizadeh, M. (2017). Simulation of growth and development of current maize (Zea mays) hybrids under different nitrogen levels in Kerman province, Iran. Shahid Beheshti University, Tehran, Iran, pp, 165. (in Persian).
16. Marwein, M. A., Choudhury, B. U., Chakraborty, D., Kumar, M., Das, A., Rajkhowa, D. J. (2017). Response of water deficit regime and soil amelioration on evapotranspiration loss and water use efficiency of maize (Zea mays) in subtropical northeastern Himalayas. International Journal of Biometeorology, 61, 845-855. https://doi.org/10.1007/s00484-016-1262-4
17. McCown, R., Hammer, G., Hargreaves, J., Holzworth, D., & Freebairn, D. (1996). APSIM: a novel software system for model development, model testing and simulation in agricultural systems research. Agricultural Systems, 50, 255-271. https://doi.org/10.1016/S1125-0301(02)00100-5
18. Mera, R. J., Niyogi, D., Buol, G. S., Wilkerson, G. G., & Semazzi, F. H. M. (2006). Potential individual versus simultaneous climate change effects on soybean (C3) and maize (C4) crops: An agrotechnology model based study. Global and Planetary Change, 54, 163-182. https://doi.org/10.1016/j.gloplacha.2005.11.003
19. Miao, Y., Mulla, D. J., Batchelor, W. D., Paz, J. O., Robert, P. C., & Wiebers, M. (2006). Evaluating management zone optimal nitrogen rates with a crop growth model. Agronomy Journal, 98, 545-553. https://doi.org/10.2134/agronj2005.0153
20. Moini, S., Javad, S., & Dehghan Manshadi, M. (2011). Feasibility study of solar energy in Iran and preparing radiation atlas. Recent Advances in Environment, Energy Systems and Naval Science: Proceedings of the 4^th International Conference on Environmental and Geological Science and Engineering. Pp, 1-7.
21. Monteith, J. L. (1986). How do crops manipulate water supply and demand? Philosophical Transactions of the Royal Society, 316, 245-259. https:// 10.1098/rsta.1986.0007.2006.09.007
22. Monzon, J., Sadras, V., Abbate, P., & Caviglia, O. (2007). Modeling management strategies for wheat–soybean double crops in the south-eastern Pampas. Field Crops Reseearch, 101, 44-52. https://doi.org/10.1016/j.fcr.2006.09.007
23. Prescott, J. A. (1940). Evaporation from a water surface in relation to solar radiation. Transactions of the Royal Society of South Australia, 64(1), 114-118. https://doi.org/10.1016/S1125-0301(02)00100-5
24. Rafiee Manesh, S., Aynehband, A., & Nabati Ahmadi, D. (2010). Investigating the effect of irrigation water amount and irrigation depletion time in different stages of growth on yield and yield components of the SC704 maize hybrid under Ahwaz climatic conditions. Crop Physiology Journal, 7, 93-105. (in Persian).
25. Rahimi-Moghaddam, S., Kambouzia, J., & Deihimfard, R. (2018). Adaptation strategies to lessen negative impact of climate change on grain maize under hot climatic conditions: A model-based assessment. Agricultural and Forest Meteorology, 253, 1-14. https://doi.org/10.1016/j.agrformet.2018.01.032
26. Saxton, K. E., & Willey, P. H. (2006). The SPAW model for agricultural field and pond hydrologic simulation. Watershed models. V.P. Singh, D.K. Frevert international editions. Boca Raton Pp, 401-435. https://doi.org/11.1016/0376-4290(86)90054-1
27. Sinclair, T. R. (1986). Water and nitrogen limitations in soybean grain production I. Model development. Field Crops Research, 15(2), 125-141. https://doi.org/10.1016/0378-4290(86)90082-1
28. Soler, C. M. T., Sentelhas, P. C., & Hoogenboom, G. (2007). Application of the CSM-CERES-Maize model for planting date evaluation and yield forecasting for maize grown off-season in a subtropical environment. European Journal of Agronomy, 27, 165-177. https://doi.org/10.1016/j.eja.2007.03.002
29. Soltani, A., & Sinclair, T. R. (2012). Modeling physiology of crop development, growth and yield. CAB, Cambridge, United Kingdom. 337p.
30. Teixeira, E. I., Zhao, G., de Ruiter, J., Brown, H., Ausseil, A. G., Meenken, E., & Ewert, F.(2017). The interactions between genotype, management and environment in regional crop modelling. European Journal of Agronomy, 88, 106-115. https://doi.org/10.1016/j.eja.2016.05.005
31. Wang, E., Robertson, M. J., Hammer, G. L., Carberry, P. S., Holzworth, D., Meinke, H., Chapmesan, S. C., Hargreaves, J. N. G., Huth, N. I., & Mclean, G. (2002). Development of generic crop model template in the cropping system model APSIM. European Journal of Agronomy, 18, 121-140. https://doi.org/10.1016/S1161-0301(02)00100-4
32. Zizhong, L., & Zenghui, S. (2016). Optimized single irrigation can achieve high corn yield and water use efficiency in the Corn Belt of Northeast China. European Journal of Agronomy, 75, 12-24. https://doi.org/10.1016/j.eja.2015.12.015