The Effect of Foliar Application of Silicon, Calcium, and Potassium Fertilizers on Yield and Some of the Agronomic and Physicomechanical Traits of Hordeum Vulgare

Document Type : Research Article

Authors

• R Nodehi ¹
• M Baradaran Firouzabadi ²
• H Mirzaee moghaddam ²
• A Gholami ²

¹ PhD Student, Faculty of Agriculture, Shahrood University of Technology, Shahrood, Iran

² Faculty of Agriculture, Shahrood University of Technology, Shahrood, Iran

10.22067/jcesc.2023.80010.1208

Abstract

Introduction
Food security is one of the basic needs of any society. Studies have been conducted on the foliar application of elements, especially silicon, calcium, and potassium, to reduce the adverse environmental effects on the physico-mechanical properties of cereals and improve their growth and development in order to maintain food security. Lodging, which is caused by a decrease in the mechanical properties of the plant stem's flexural strength, is characterized by bending or fracture that changes the angle of the grain stem from the vertical position. Due to the important factors involved, an important aspect of performance is directly and indirectly related to the occurrence of fungal diseases and nutrient-related issues affecting the physico-mechanical properties of the plant, such as flexural strength. The efficacy of silicon, calcium, and potassium in addressing these concerns is notable.
Materials and Methods
This research was conducted at the research farm of the Faculty of Agriculture, Shahroud University of Technology, located in Bastam. The seeds of the Reyhan cultivar, a high-yielding and early spring-type barley plant suitable for regions with mild winters and short springs, were used in this study. Planting operations followed agricultural principles, and irrigation was carried out using atmospheric and ridge methods. The first irrigation took place after planting, and subsequent irrigations were performed at eight-day intervals. Harvesting was done manually at the end of the growing period, specifically 115 days after planting.
The experiment followed a factorial design and utilized a randomized complete block design with three replications. On July 11 (115 days after planting), a harvest sample measuring 50 cm² was taken from each experimental plot, accounting for the margins, to determine the yield.
For the barley stem bending test, a three-point bending test was conducted using a material testing machine. The probe applied a loading speed of 5 mm.min^-1. A specially designed jaw was used for the barley stem cutting test, taking into consideration the characteristics of the barley plant. The incision test was performed on the second median, and the loading speed was set at 20 mm.min^-1.
Results and Discussion
The main axial stem serves as a storage organ, supporting the filling grains through stock re-transference. A desirable trait is having a higher dry weight in the stem. Among the treatments, foliar application of 6 mM calcium chloride, along with sodium silicate at all three levels and spraying with 12 mM silicon at concentrations of 150 and 300 mg.L^-1, showed statistically superior results.
Stem diameter is an important attribute related to plant strength, stability, resistance to lodging, and certain fungal diseases. The control plants had a stem diameter of 2.63 mm, which significantly improved with the treatment compounds. Barley stem wall thickness increased significantly with both 150 and 300 mg.L^-1 levels of calcium chloride, combined with all three levels of sodium silicate spraying. These factors play a role in determining the ultimate photosynthetic destination, as well as the efficiency and economic production of the target seed cultivar or crop.
The results indicated a significant increase in grain yield when simultaneously applying 10 mg.kg^-1 silicon with 6 mM calcium chloride, showing a 65% improvement compared to the control. Treatment with three potassium sulfate variations, combined with either 6 or 12 mM calcium chloride, or 12 mM calcium chloride alone, enhanced the flexural strength of the stem by 75%, 60%, and 62%, respectively. Among the treatment compounds studied, the shear strength of barley stems ranged from 2.63 MPa to 5.43 MPa. Plants treated with sodium silicate at concentrations of both 150 and 30 ml.L^-1, in conjunction with 6 mM calcium chloride foliar application, exhibited higher shear strength compared to other treatments.
Conclusion
This study demonstrated the tripartite effect of the treatments. The treatment composition derived from a surface area of 300 ml.L^-1 of sodium, combined with 6 and 12 mM calcium chloride without potassium sulfate, had the greatest impact on flexural strength and stem diameter.

Keywords

• Calcium chloride
• Cutting test
• Potassium sulfate
• Sodium silicate
• Yield

20.1001.1.20081472.1402.21.3.2.2

Main Subjects

• Crop yield

---

Open Access

©2023 The author(s). This article is licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source.

References

1. Acreche, M. M., & Slafer, G. A. (2011). Lodging yield penalties as affected by breeding in Mediterranean wheats. Field Crops Research, 122(1), 40-48. https://doi.org/10.1016/j.fcr.2011.02.004
2. Ahmad, B. (2014). Interactive effects of silicon and potassium nitrate in improving salt tolerance of wheat. Journal of Integrative Agriculture, 13(9), 1889-1899. https://doi.org/10.1016/S2095-3119(13)60639-5
3. Anten, N. P., Casado‐Garcia, R., Pierik, R., & Pons, T. L. (2006). Ethylene sensitivity affects changes in growth patterns, but not stem properties, in response to mechanical stress in tobacco. Physiologia Plantarum, 128(2), 274-282 https://doi.org/10.1111/j.1399-3054.2006.00736.x
4. Asadi Nasab, N., Nabipour, M., Roshanfekr, H., & Rahnama Ghahfarokhi, A. (2018). Effect of Calcium Chloride Application Time on Reducing the Effects of Heat Exhaustion on Yield and Yield Components of Wheat in Ahvaz. Iranian Journal of Field Crops Research, 16(4), 833-846. (in Persian). https://doi.org/10.22067/gsc.v16i4.71018
5. Asadi, A. Haqqania, M., Lekzian, A. & Mafotun, M. (2013). The effect of different amounts of silicon and nitrogen on morphological characteristics, performance and yield components of two wheat cultivars. Journal of Agriculture, 103(4), 66-78. (in Persian). https://doi.org/10.22092/aj.2014.101218.
6. Bakhat, H. F., Bibi, N., Zia, Z., Abbas, S., Hammad, H. M., Fahad, S., Ashraf, M. R., Shah, G. M., Rabbani, F., & Saeed, S. (2018). Silicon mitigates biotic stresses in crop plants: a review. Crop Protection, 104, 21-34. https://doi.org/10.1016/j.cropro.2017.10.008
7. Bromand, M., Esfahani, M., Alizadeh, M. R. & Alami, A. (2013). Evaluation of morphological traits related to plant dormancy in native and modified rice cultivars (Oryza sativa ). Journal of Cereal Research, 3(3), 181-195. (in Persian). https://doi.org/10.22034/saps.2021.44978.2650.
8. Crook, M., & Ennos, A. (1995). The effect of nitrogen and growth regulators on stem and root characteristics associated with lodging in two cultivars of winter wheat. Journal of Experimental Botany, 46(8), 931-938. https://doi.org/10.1093/jxb/46.8.931.
9. Emam, Y. (2013). Cereal Crops. Iranian University Press.190 P. in Persian.
10. Faraji, F., Esfahani, M., Alizadeh, M. R. & Alami, A. (2016). Evaluation of the effect of stem morphological and physiological characteristics on the dormancy of 12 rice genotypes. Journal of Crop Improv, 18(1), 183-201. (in Persian). https://doi.org/10.22059/jci.2016.56557
11. Food and Agriculture Organization of United Nations (FAO). (2016). FAO report on world cereal status in 2016. Retrieved from http://www.fao.org/worldfoodsituation/csdb/en/
12. Gere, J. M., & Timoshenko, S. (1997). Mechanics of Materials. ed. Boston, MA: PWS.
13. Gong, H., Zhu, X., Chen, K., Wang, S., & Zhang, C. (2005). Silicon alleviates oxidative damage of wheat plants in pots under drought. Plant science, 169(2), 313-321. https://doi.org/10.1016/j.plantsci.2005.02.023
14. Ibrahim, M., Faisal, A., & Shehata, S. (2016). Calcium chloride alleviates water stress in sunflower plants through modifying some physio-biochemical parameters. American-Eurasian J Agric Environ Sci, 16(4), 677-693. https://doi.org/10.5829/idosi.aejaes.2016.16.4.12907
15. Jafardokht, R., Mousvinik, M., Mehraban, A., & Basiri, M. (2015). The effect of drought stress and foliar application of low consumption elements on physiological characteristics and Absorption of nutrients in mung bean plant. Agricultural Plant Production Journal, 8(1), 121-141. (in Persian). https://dorl.net/dor/20.1001.1.2008739.1394.8.1.7.7
16. Jamshidi, P., Baradaran Firoozabadi, M., Oloumi, H., & Naghavi, H. (2017). Evaluation of Foliar Spraying of Zinc and Calcium Fertilizers on Yield and Physiological Traits of Safflower under Lead Stress. Iranian Journal of Field Crops Research, 15(2), 368-379. (in Persian). https://doi.org/10.22067/gsc.v15i2.51279
17. Ju, S., Wang, L., & Chen, J. (2020). Effects of silicon on the growth, photosynthesis and chloroplast ultrastructure of Oryza sativa L. seedlings under acid rain stress. Silicon, 12, 655-664. https://doi.org/10.1007/s12633-019-00176-8
18. Kashiwagi, T., Sasaki, H., & Ishimaru, K. (2005). Factors responsible for decreasing sturdiness of the lower part in lodging of rice (Oryza sativa). Plant Production Science, 8(2), 166-172. https://doi.org/10.1626/pps.8.166
19. Khaje pur, M. R. (2011). Principles and bases of agriculture. Isfahan University of Technology Jahad, 398 pages. (in Persian).
20. Khodabande, N. (2014). Cereals. University of Tehran Press, 506 pages. (in Persian).
21. Khosravi moshizi, M. & Sarcheshmehpur, M. (2015). The effect of calcium and potassium solution spraying on plant growth, yield and post-harvest characteristics (Cucumis melo) Fruit harvesting of two melon varieties. Journal of Production and Processing of Agricultural and Horticultural Products, 5(17), 295-310. (in Persian). https://doi.org/10.18869/acadpub.jcpp.5.17.295.
22. Khalifa, R. K. M., Omaima, M. H., & Abd-El-Khair, H. (2009). Influence of foliar spraying with boron and calcium on productivity, fruit quality, nutritional status and controlling of blossom end rot disease of Anna apple trees. World Journal of Agricultural Sciences, 5(2), 237-249.
23. Kouchaki, A. & Khajeh Hosseini, M. (2017). Modern agriculture. Publications of Jihad University of Mashhad. Mashhad, 550 pages. (in Persian).
24. Krishnarao, R., & Godkhindi, M. (1992). Distribution of silica in rice husks and its effect on the formation of silicon carbide. Ceramics international, 18(4), 243-249. https://doi.org/10.1016/0272-8842(92)90102-J
25. Lennon, A. J., Ho-Baillie, A. W., & Wenham, S. R. (2009). Direct patterned etching of silicon dioxide and silicon nitride dielectric layers by inkjet printing. Solar Energy Materials and Solar Cells, 93(10), 1865-1874. https://doi.org/10.1016/j.solmat.2009.06.028
26. Liang, Y., Chen, Q., Liu, Q., Zhang, W., & Ding, R. (2003). Exogenous silicon (Si) increases antioxidant enzyme activity and reduces lipid peroxidation in roots of salt-stressed barley (Hordeum vulgare). Journal of Plant Physiology, 160(10), 1157-1164. https://doi.org/10.1078/0176-1617-01065
27. Ma, J. F. (2010). Silicon transporters in higher plants. MIPs and their role in the exchange of metalloids, 99-109. https://doi.org/10.1007/978-1-4419-6315-4_8
28. Madanipour, E., Asilan, K., & Mansourifar, S. (2017). The effect of hexaconazole, penconazole and calcium silicate on the quantitative and qualitative traits of two varieties of soybean under water deficit conditions. Iranian Journal of Field Crop Science, 48(2). (in Persian). https://doi.org/10.22059/ijfcs.2017.133422.653957
29. Mam Rashpour, O., & Nazari Deljoo, M. J. (2019). Persistence and physiological response of cut flowers of Lilium Oriental to the semi-essential element silicon in soilless cultivation. Horticultural Sciences of Iran, 50(1), 74-89. (in Persian). https://doi.org/10.22059/ijhs.2018.243479.1330
30. Mehdinjad, N., Jamalpour, H., Fakheri, B. & Khajeh, M. (2019). Investigating the response of some physiological characteristics and seed yield of purslane cultivarsto drought stress and foliar application of nano iron chelate (Portulaca oleracea). Journal of Plant Environmental Physiology, 14(54), 74-89. (in Persian). https://dorl.net/dor/20.1001.1.76712423.1398.14.54.7.7.
31. Mom rashpour, O., Nazari deljoo, M. J. & Haghshenas, M. (2018). Responses of growth and development, yield and quality of greenhouse cucumber to silicon foliar application. Science and Techniques of Greenhouse Crops, 9(3), 13-21. in Persian. https://doi.org/10.29252/ejgcst.9.3.13
32. Nomura, T., Ohkubo, S., Nagano, A. J., Samadi, A. F., Adachi, S., & Ookawa, T. (2022). Physiological and morphological factors affecting leaf sheath reinforcement and their contribution to lodging resistance in rice. Plant Production Science, 1-17. https://doi.org/10.1080/1343943X.2022.2160362
33. Pinthus, M. J. (1974). Lodging in wheat, barley, and oats: the phenomenon, its causes, and preventive measures. Advances in Agronomy, 25, 209-263. https://doi.org/10.1016/S0065-2113(08)60782-8
34. Porabolghasem, M., & Ghazanfari Moghadam, A. (2021). Measuring Mechanical Properties and Simulating the Creep Behavior of Wild Cane Stem using Burger-Voigt Model. Journal of Agricultural Machinery, 11(2), 385-397. (in Persian). https://doi.org/10.22067/jam.v11i2.80688
35. Qazvini, H., Yousefi, A. & Saeedi, A. (2002). Joe Rihan; Suitable for cultivation in temperate regions of the country. Seed and Plant Breeding Research Institute, 27-32. (in Persian).
36. Rabani, H., Sohrabi, N. & Forotanmehr, A. (2015). Determining the shear energy of green bean )Phaseolous vulgaris.( Journal of Agricultural Mechanization, 2(2), 26-30. (in Persian).
37. Sadeghi Lotfabadi, S., Kafi, M., & Khazai, H. (2011). Investigating the modulating effects of soil application and foliar application of potassium chloride and calcium chloride on morphological and physiological traits of sorghum plant under salinity stress conditions. Water and Soil Journal (Agricultural Sciences and Industries), 24(2), 385-393. (in Persian). https://doi.org/10.22067/JSW.V0I0.3255
38. Samuels, A., Glass, A., Ehret, D., & Menzies, J. (1993). The effects of silicon supplementation on cucumber fruit: changes in surface characteristics. Annals of Botany, 72(5), 433-440. https://doi.org/10.1006/anbo.1993.1129
39. Sedghi, M., & Seyed Sharifi, R. (2013). Effects of foliar supplements of nitrogen, phosphorus and potassium on grain yield and macro element transport and adsorption efficiency of hybrid rice (Oryza sativa). Research in Field Crop Journal, 1(1), 64-75. (in Persian).
40. Sharbatkhari, M., Shobbar, Z.-S., Galeshi, S., & Nakhoda, B. (2016). Wheat stem reserves and salinity tolerance: molecular dissection of fructan biosynthesis and remobilization to grains. Planta, 244(1), 191-202. https://doi.org/10.1007/s00425-016-2497-3
41. Siddiqui, M. H., Al-Whaibi, M. H., Sakran, A. M., Basalah, M. O., & Ali, H. M. (2012). Effect of calcium and potassium on antioxidant system of Vicia faba under cadmium stress. International Journal of Molecular Sciences, 13(6), 6604-6619. https://doi.org/10.3390/ijms13066604
42. Stapper, M., & Fischer, R. (1990). Genotype, sowing date and plant spacing influence on high-yielding irrigated wheat in southern New South Wales. II. Growth, yield and nitrogen use. Australian Journal of Agricultural Research, 41(6), 1021-1041. https://doi.org/10.1071/AR9901021
43. Yahyaabadi, H., & Asgharipour, M. R. (2015). Effect of silicon foliar application on yield and some physio-chemical properties of fennel under limited irrigation. Journal of Crops Improvement, 17(4). (in Persian).
44. Zhang, Q., Yan, C., Liu, J., Lu, H., Wang, W., Du, J., & Duan, H. (2013). Silicon alleviates cadmium toxicity in Avicennia marina (Forsk.) Vierh. seedlings in relation to root anatomy and radial oxygen loss. Marine pollution bulletin, 76(1-2), 187-193. https://doi.org/10.1016/j.marpolbul.2013.09.005